MIXERS
12/12/8/2	Series 3, 24 inputs, 8 groups, inserts, swept mid, 3 Aux, 100mm faders	1,369.82
16/16/8/2	Series 3, as 12/12/8/2 but 32 inputs, 16 channels	1,628.79
OPTION	Phantom power per channel (min 6 channels)	8.51
19" OUTBOARD
HPA-6	6 channel stereo headphone amp, 1u, 2 stereo & 1 Aux in, peak leds, hi/lo e.q.	377.75
DI-6M	6 channel active DI box/line mixer, 1u, 3 way attenuator, ground lift	363.65
PB-96	48 way stereo balanced jack patchbay, 1u, easy norm/un-norm, no switches	96.26
POWER AMPS
SPA-200	Stereo 100w RMS per channel 4 ohms, Mosfet 1u, mono bridge, peak leds, thermal/short protection	384.02
SPA-400b	As above but 200w RMS per chan, bal, soft start, Speakons, 2 fans	482.26
BLACK BOXES
DI-3	Active DI Box, ground lift, 3 way atten, battery/phantom/DC	55.02
DI-2	As DI-3 but two channels	92.07
DI-1	Passive DI Box, twin transformers, ground lift	40.96
DI-2P	Passive 2 channel direct injection box, as above	58.42
PPS-248	2 channel 48 volt phantom power supply, mains powered	85.87
PPS-48	4 channel 48 volt phantom power supply, mains powered	112.59
PS-4	Passive 1 in 4 out stereo jack splitter, rubber feet, for headphones etc.	28.13
PS-4V	As PS-4 with two volume controls, one on chan 1 and 1 on chan 4	38.30
PS-8	Passive 1 in 8 out stereo jack splitter	52.06
PS-8V	As PS-8 with 4 volume controls, one each on chans 1,4,5, and 8	66.15
AE-2	Audio Extender, box with 1 mono & 1 stereo jack socket to mini jack plugs on 75cm cable, bring rear panel soundcard sockets (mic/headphones) to front.	22.19
DC-8DUAL	8 output 9v DC power supply for multi-keyboards, Yamaha or Casio polarity, includes 8 x 3metre DC-DC leads	102.27
DC-8DPR	Regulated version of DC-8DUAL, for guitar effects pedals, radio mics, includes two each of 4 different length DC leads	116.40
DC-412	4 output 12 volt Hi-Current DC power supply, Yamaha polarity, for keyboards with large LCD screens and disc drives. 1 amp per output, inc 4x3m DC leads	124.77
HPA-2	2 channel stereo headphone amp, 1 main and 1 Aux input	155.91
19" RACKING
RMS-3	3u 19" rackmount wings & clamp rails for non-rack equipment	31.73
OPTION	Steel shelf for RMS-3, for small or half-rack items	8.80
ACOUSTIC FOAM PANELS */BASS TRAPS
PROLINE 143	40mm Sound Absorption Panel, rounded profile, 1m square, fire retardant, grey	22.81
PROLINE 153	50 mm as above	26.12
PROLINE 173	70 mm as above	34.56
STUDIOLINE 253	50 mm Pyramid Profile, 1.2m square, as above	28.41
STUDIOLINE 273	70 mm Pyramid Profile, as above	48.95
STUDIOLINE 293	100 mm Pyramid Profile, as above	51.04
BT-250	Corner Bass Trap, 250x250x560mm, order in pairs	23.97
BT-400	Corner Bass Trap, 400x400x560mm, order in pairs	55.45
* Minimum order for foam panels, 10 working days delivery: Proline 143: 34 panels, 153: 30 panels, 173: 24 panels. Studioline 253: 28 panels, 273: 18 panels, 293: 16 panels or, any smaller quatity but unspecified delivery date.  Please order in even numbers of panels (they are made in pairs). Please phone 01923-234050 or email mtrltd@aol.com for details.

To the top
Starter Kit	2 x 6U uprights, 6 x 1U side arms, bolts, wall plugs, screws and end caps	49.43
UP6U	6U wall upright, incl. 2 x wall plugs, 2 x screws, price each	12.78
UP12U	12U upright as above, price each	25.31
End Caps	For all uprights, each	0.77
SA1U-250	Pair of 250mm 1U side arms, incl. 4 x M6 bolts	6.60
SA2U-400	Pair of 400mm 2U side arms, incl. 8 x M6 bolts	16.05
SA2U-600	Pair of 600mm 2U side arms, incl. 8 x M6 bolts	19.68
TOPPAN-250	Top or Bottom security panel, 250mm deep	25.97
TOPPAN-400	Top or Bottom security panel, 400mm deep	36.36
TOPPAN-600	Top or Bottom security panel, 600mm deep - available soon	46.74
DISTRO-H4/H5/H6/H7	Horizontal 1.5U rackmounting mains distro board, with 4/5/6/7 13-amp sockets	30.76/33.26/ 35.73/38.23
DISTRO-V4/V5/V6/V8/V10/V12	Vertical 1.5U rackmounting mains distro board, with 4/5/6/8/10/12 13-amp sockets	30.76/33.26/ 35.73/41.50/ 45.08/50.62
Cable Tidy	1metre, 25mm x 40mm, open slot fingers, snap-on lid, CSA electrical specs, flame/combustion resistant to DIN 4102 & ASTM D 635.  Also available in 2 metre lengths.	9.24
To top  From 1st May 2006   P.A. MIXER-AMPS MS/100 T 100 watts, 1 x balanced mic & 1 x line input, shared bass & treble, ACL 149.00 MS/250  250 watt version of above 175.00 BG/100 T 100w, 1 mic & 2 line (phono) chans, bass/treble, priority override on chan 1 205.00 BG/250 250w version of above 239.00 PA/100 T 100 watts, 4 chans, hi & bal low inputs, digital delay, f/x loop, ACL 249.00 PA/250 250 watt version of above 289.00 PA6/250 250 watts 6 chans, ch 1-4: combi XLR/jack, 3 band eq, rev & aux/monitor send. Ch 5-6: phono/jack line in, hi/lo eq. Digital fx, line & aux in/out w vol, Speakons 338.00 PA6/600 600 watts, as above 329.00 V12/500 Stereo 2x250 watts, 19" 2u, 6 mic & 3 stereo lines in, digital effects, fan, ACL 519.00 V12/1000 Stereo 2x500 watts, as above 599.00 V12/1300 Stereo 2x650 watts, as above 639.00 V12D/200 R Stereo sleeved version, 2x100 watts, 6 mic & 3 stereo lines in, digital delay only 305.00 V12D/500 R Stereo 2x250 watts, as above 339.00 V12D/1000 R Stereo 2x500 watts, as above 390.00 V12D/1300 R Stereo 2x650 watts, as above 429.00 POWER AMPLIFIERS SS/200 2x100 watt slave, wood/carpet case, thermal cut, fan, Active Clip Limiter 249.00 SS/500 2x250 watt version of above 289.00 SS/1000 2x500 watt version of above 359.00 SS/1300 2x650 watt version of above 389.00 SA/200     new 2 x 100w, 1u rackmount, DC/short, fan, twin VU's 249.00 SA/500     new 2 x 250w, 1u rackmount, as above 299.00 MA/200        2x100 watts, 19" 2u rackmount, DC, thermal & short protection, proportional fan, clip led 269.00 MA/500          2x250 watts, as above 305.00 MA/1000      2x500 watts, as above 379.00 MA/1300      2x650 watts, as above 409.00 MA/1600 2x800watts, as above 499.00 MA/2000 2x1,000 watts, as above 519.00 SX/500 2x250 watts, 19" 2u, crossover @ 150Hz, DC/thermal, fan, VU ladders, ACL 419.00 SX/1000 2x500 watts, as above 489.00 SX/1300 2x650 watts, as above 529.00 SX/1600 2x800 watts, as above 599.00 SX/2000 2x1000 watts, as above 699.00 DISCO MIXERS - all new MD12/600/cdg 600w, 1 mic w/vox, 4 line inputs, monitor, VU, carpet console, twinCDG player 579.00 SD14/500/cdg 2 x 250w, SD14 mixer, twin CDG player all in carpet console, fan 859.00 SD14/1000/cdg 2 x 500w as above 939.00 SD14/1300/cdg 2 x 650w as above 979.00 SD15/500/cdg 2x250w, SD15 mixer, twin CDG player all in carpet covered console 929.00 SD15/1000/cdg As SD 15 + 2x500w amp 999.00 SD15/1300cdg As SD 15 + 2x650w amp 1,099.00 SD15/500cdg/tft As SD13/500cdg plus rackmounted TFT 1,100.00 SD15/1000cdg/tft As above but 2 x 500w 1,200.00 SD15/1300cdg/tft As above but 2 x 650w 1,300.00 Flexilight 12v 60mA black flexilight, 4 ultrabright leds, plugs into XLR socket 19.00 TFT KIT Rackmounted TFT kit, retro-fit for SD15 console, factory/dealer fit only 199.00 WEDGE MONITORS PCM 100W 100w powered wedge, 1x10" & horn, mic & line in, 2 band eq, variable notch fltr 259.00 PCM 250W 250 watt version of above 299.00 PM 250 Matching 300 watt unpowered, 1x10" & horn  175.00 POWERED SPEAKER SYSTEMS - all 8 ohms, priced each PCM 100S 100w processor controlled, 1x10" & horn, 1 mic & 1 line in, bass and treble e.q.,anti-feedback, mix and extension cab outputs, clip limiter. Use full range alone, or with 1x PS 10/250 259.00 PCM 250ST 250 watt version but trapezoidal, use with 1x PS 10/250T 299.00 BG 100ST 100w 1x10" & horn. Chan 1: mic, e.q, vox. Chan 2: 2xAux, e.q., 10" & horn, ACL, use alone or with 1 x PS 10/250 299.00 BG 250ST 250 watt version, use alone or with PS10/250T 339.00 SPEAKER SYSTEMS - all 8 ohms unless marked, and priced in pairs PS 6/100 100w 1x6" and dome tweeter, 12dB/octave crossover, dark blue paint 189.00 PS 8/100 100w 1x8" and HF horn, 12dB/octave crossover @ 4kHz1 259.00 PS10/250 new 250w 1x10" & horn, trapezoidal, painted 339.00 PS10/350 new 350w 1x10" & Constant Directivity horn, as above 419.00 PS10/250T 250w 1x10" and HF horn, trapezoidal, carpet covered 389.00 PS 12/400T    400w 1x12" and HF horn, trapezoidal carpet covered, 12dB/oct xover 449.00 PS 12/450T    450w 1x12" and CD horn, trapezoidal carpet covered, 2way xover 2.5kHz 599.00 PS 15/400T 400w 1x15" & HF horn, trap, carpet, 2 way xover @ 4kHz 459.00 PS 15/600T   600w 1x15" & CD horn, trap, carpet, 2way xover 2.5kHz (4 ohms to order) 649.00 PS1210/700T new 700w 1x12",1x10", CD horn, 3 way xover, 4 ohms 675.00 PS1512/900T new 900w 1x15",1x12"453.34,799 CD horn, 3 way xover, 4 ohms 799.00 PW 12/450    450w 1x12" bass cab, 150Hz hi pass link out, carpet covered 539.00 PW 15/600 600w 1x15" bass cab, as above (4 ohms to special order) 599.00 PW 215/1200 1,200w 2x15" triple chamber carpet covered subwoofer, 4 ohms 999.00 1U RACKMOUNT MIXERS/MIXER-AMPS - all with ACL BGR 100     new 1u, 100 watts, 3 mic channels + e.q. & vox, 3 line inputs with e.q., 12 led VU 229.00 BGR 250    new 1u, 250 watt version of above 259.00 DA 200       new 1u 2 x 100 w, 2 mic inputs, common e.q., voice override, 4 aux line inputs on rear phono connectors with e.q., 2 leds for remote, 2 leds for voice override, VU meter, Mono/Stereo switch, rear socket for remote volume controls and alarm interface, proportional speed fan. 349.00 DA 500      new 1u, 2x250w version of above 389.00 KA 200       new 1u, 2x100w, 3 mics, 3 stereo lines, vox, VU, 12 digital fx, speakons 375.00 KA 500       new 1u, 2x250w as above 410.00 2U RACKMOUNT ZONERS DA/1000 2u, 500+500w, facilities as DA 200 459.00 DA/1300 2u, 650+650w, facilities as DA 200 499.00 Z2Z 200 100+100w zone amp, 2 zones, up to 4 inputs, remote level & eq, 2 mics and eq, vox, expandable 385.00 Z2Z 500 250+250w as above 425.00 Z2Z 1000 500+500w as above 489.00 Z2Z 1300 650+650w as above 529.00 OPTIONS OPTION T 100 watt 100 volt line transformer fitted to a 100 watt mono amp 61.68 OPTION R In 2u 19" Rackmount version, instead of wood/vinyl sleeve, add: 12.00 ACCESSORIES 100VL 100 watt 100 volt line transformer 25.98 250VL 250 watt 100 volt line transformer 39.69 100w/metal 100w 100v line transformer in metal case with terminal block 55.00 250w/metal 250w 100v line transformer in metal case with terminal block 63.00 2100w/metal 2 x 100w 100v line transformers in metal case with terminal block 73.00 2250w/metal 250w 100v line transformer in metal case with terminal block 86.00 2UFB F/CASE 2U flightcase, front & back lids, black, 12mm MDF. Max amp depth:300mm 54.00 4UFB F/CASE As above, 4U 59.00 6UFB F/CASE As above, 6U 69.00 Zeta 690 mic To Top High quality low impedance mic, lockable on/off switch, locking XLR 49.99

Please order multicore cable in multiples of 10 metres	ATM CABLES	From June 2007
ATMIC	Balanced Mic, 6.5mm, PVC jacket, black, red, green, blue, yellow	1.16
PATCH Black	Patch & light duty mic cable, 4mm, fits Bantam jack plugs, black,
	blue/green/orange/purple/red/turquoise/white, per metre	1.05
STARQUAD	Starquad mic cable, lapped screen, black, blue, red, per metre	1.31
UNI-1-ES	Single pair multicore, 2.4mm, foil screen, individual jacket, numbered, for installation, per metre.	0.50
CS-UNI-1	Contractor series instal signal cable, blk, grey,red,violet,white	0.61
UNI-2-ES	2 pair digital & analogue m/core, OFC, laminated aluminium foil shield, blk, per metre, external dia: 8.2mm	2.06
UNI-4-ES	4 pair as above, diameter 10.1mm, per metre	3.33
UNI-8-ES	8 pair multicore, as above, diameter 14mm, per metre	5.94
UNI-12-ES	12 pair as above, diameter 16mm, per metre	8.45
UNI-16-ES	16 pair as above, diameter 17.8mm, per metre	11.07
UNI-24-ES	24 pair Arctic grade PVC sheath, per metre 20.5mm	17.39
UNI-32-ES	32 pair multicore, as above, per metre, 22.5mm	21.88
UNI-40-ES	40 pair as above, diameter 25mm, per metre	26.21
UNI-48-ES	48 pair multicore, 26mm, as above, per metre, 36.5mm	31.77
SPL 0.75-2	2 core .75mm OFC speaker cable, black, per metre	0.64
SPL 1.5-2	2 core 1.5mm OFC speaker cable, black, per metre	1.13
SPL 2.5-2	2 core 2.5mm OFC speaker cable, black, per metre	1.88
SPL 4.0-2	2 core 4mm OFC speaker cable, 56 strands	3.10
SPL 2.5-4	4 core 2.5mm OFC speaker cable, black, per metre	3.19
SPL 4.0-4	4 core 4.0mm OFC speaker cable, black, per metre	4.71
SPL 2.5-8	8 core 2.5mm OFC speaker cable, black, per metre	7.07
CS-0.75-2	Lo smoke zero halogen Contractor series 2 x 0.75mm speaker cable, blk/white	1.03
CS-1.5-2	As above, 2 x 1.5mm	1.40
CS-1.5-4	As above, 4 x 1.5mm	2.47
CS-2.5-2	As above, 2 x 2.5mm	2.29
CS-2.5-4	As above, 4 x 2.5mm	4.59
CS-2.5-8	As above, 8 x 2.5mm	8.48
Wordclock	Pre-made cables, 75 ohm BNC to BNC, 2m or 3m	8.33/9.04
8412	Belden Mic cable	4.26
Also Available:	Serial Digital and Video cable, RF coaxial, data CAT5e & CAT6 cable, High Performance digital/analogue multicore, 2pair to 48pair individ. braid
Looms and complete multicore systems........................................................P.O.A.

To Top           From Feb 2007 Inc. VAT

Pacifica Mic Pre	1U stereo, custom in/out transformers, balanced in/out, phase, 20dB pad, 48v phantom, 9Hz-101kHz, 72dB gain	1,399.00
MP-2A Stereo Mic Pre	2U stereo valve pre, EF86 inputs, 6N1P outputs, Jensen input/custom output transformers, 60dB gain, VU, phantom, polarity, phase sw, pad, 4 tones	1,818.79
HM-2EQ HAMMER	2U 2 chan valve equaliser, low, mid & high ±13dB, bypass, lo & hi cut switch	1,739.99
P-1	Vertical module for API Series 500 'Lunchpack' Racks. Mic pre, phantom, pad, phase, DI in, based on the Pacifica	639.07
EM Silver	Vertical module for API Series 500 'Lunchpack' Racks. Mic pre, phantom, pad, phase, DI in, steel output transformer - "a darker sound"	639.07
EM Red	Vertical module for API Series 500 'Lunchpack' Racks. Mic pre, phantom, pad, phase, DI in, 50/50 output transformer - "up front mids"	639.07
EM Blue	Vertical module for API Series 500 'Lunchpack' Racks.  Mic pre, phantom, pad, phase, DI in, nickel output transformer - "airy highs"	639.07
EM Gold	As above, Red input & Silver output transformer - "dark with up front mids"	639.07
EM PEQ	Based on Pultec EQP-1A: 3 frequency high atten, 7 freq. parametric mid, 4 frequency lo boost/cut	1,10.23
500HR	Dual slot 1U rack mounting frame with power supply for A-Designs and other 500 Series compatible audio modules, API-approved	261.57
Reddi	The ultimate valve DI box, 6N1P, jack/XLR input, 16dB gain, 20-60kHz ± 3dB, link out, ground lift	633.60
Atty	Passive stereo level controller, dual in/out XLR's, mute button	91.86
ATTY2'D	1U 19" passive line level controller, 2 stereo pairs and 2 mono signals, master mute, can be used in 5.1 surround sound	446.02
LPV-1	Low profile video adapter, place video monitors anywhere on site	15.90
LP-9	Low profile adapter for RS232 or dB-9	15.90
LPA-1	Low profile adapter for DB-25's	15.90
LPA-1r	As LPA-1 but reversed terminal blocks